Wiring installation: a guide for pros

What customers ask, how to win the job, and what to put on your profile.

Offering wiring installation

Wiring installation is planning work as much as it is pulling wire. Electricians who win it show a clear circuit plan, a load calculation, and a schedule that fits the framer, drywall crew and homeowner.

What customers ask

  • How many new circuits do I need for this room, and why that many?
  • Can my current panel handle the new load?
  • Will you open my walls, and who repairs them afterward?
  • How long before the walls can be closed after the rough-in?
  • Do you pull the permit, and what inspections happen?

How to win the job

  • On the first call, ask what the room will be used for and which large loads are planned. Those answers set the circuit count.
  • Bring a load worksheet to the walkthrough and show the existing panel's capacity and open spaces.
  • Give a circuit map drawn to the room layout with each device labeled, so the homeowner sees what the new circuits serve.
  • Quote the rough-in and the finish work as separate line items, so the customer sees where wall repair starts.
  • Coordinate with the framer or drywall crew before the walls close, and mark any cable runs that must stay clear of fasteners.
  • Walk the customer through the inspection checklist you use before the final, so nothing surprises them at the final inspection.

What to put on your profile

  • Photos of rough-in work before drywall, with cable secured and boxes labeled
  • A panel photo showing clean labeling and organized breaker layout
  • Remodel examples, such as a basement or garage build-out, with the circuit count listed

Follow-up that helps the customer

  • Offer a panel capacity review for the next project, so future circuit additions are planned in advance
  • Suggest dedicated circuits for equipment the customer plans to buy, such as a range, shop tool or freezer
  • Offer a labeled circuit map as part of the final handoff, so the homeowner can find every circuit later

Licenses and permits

Wiring installation is commonly done under an electrical contractor license, and a permit with inspections is often needed for new circuits. Check with your state or local licensing agency and building department for the rules that apply before you take the job.

Questions

When should I write a load calculation?

Write one whenever you add circuits or change the service. It shows the panel can carry the new loads and gives the inspector a record to check.

Who schedules the rough-in inspection?

The permit process decides that. Confirm with the customer and the building department who requests the inspection, and do not close the walls until it passes.

How do I handle a condition found once the walls are open?

Document it with photos, tell the customer before you do the extra work, and get written approval for any change in scope.

About this guide

This national guide is written and checked by infinibell. Rules and conditions differ by place, so local pros are credited on guides for the cities they serve, not on national ones.

Edit history

More electrical guides for pros

Start here

About this guide

Get wiring installation requests

Customers pick you by name. Signup is free, and you pay only for leads you accept.

Join as a pro
Sign up free